Application Chain:T8F Sprockt /Chain. Under Voltage turn the 1.1-3.7V. Note: We can not provide Installation guide, we can provide motor and controller wire diagram ONLY!Connect the motor phase to ControllerPhase (Color to color). Controller Hall To Motor Hall Wire.
The Small White Wire is Self-study Wire. Conncet the Power lock Wire. Ignition key, can connect the power lock wire to itselfopen the power lock. Open the battery, turn on the throttle, motor will be working.
Note: when motor reverse, close the self-study wire when motor stop, connect the self-study wire again, then motor willl be Positive rotation. Let the motor working about 10 seconds, cut off the self0study wire, cut off the power lock wire about 10 second too.Then The controller will automatically save the program. Then can use other function wire. 48V-72V 3000W brushless controller function. Contact the electric lock line. Contact the battery line(red:+, black:-).
Docking the two self-learning lines, twist throttle, the wheel will forward or reverse. If wheel forward, Separate the self-learning line. If wheel reverse, Separate the self-learning line.Then Docking the self-learning line again. Other functions can be connected as needed. Please understand there may be a delay because of bad weather or custom clearance. Please check and make sure your product(s) before signing for the parcel to avoid any mistakes or missing.
We will keep providing you great services here. We will do our best to solve any problems and provide you with the best customer services.