Speed: 35-40km/h - Input: AC 90-240V 50/60Hz - Output: DC 24V 1.6A-2.0A - Flywheel Teeth: 16 - Rated Speed: 3300 rpm - Reduction Ratio: 9.78 - Motor Load Capacity: 130KG (If tricycle body is too heavy, it is not recommended) - N. 5.2kg Wiring Instruction of Motor Controller: 1.Black & Red-Battery (Battery is not included) 2. Blue & White(or yellow)-motor 3. Blue & Red-Key Switch 4. Blue & Red & Black-Accelerator 5. Red & Black-Charging Port 8.
Red & Black-Brake Light There are labels on connector 6,7,8 Fitment: - This kit is suitable for bike with one gear only. Package Included: - 1 x Motor 350W - 1 x Charger 24V 1.8A - 1 x Motor Controller - 1 x 3-In-1 Light 24V (Display electricity & electronic horn) - 2 x Speed Control Switches - 2 x Handles - 1 x Key Switch - 1 x Chain - 1 x Flywheel 16-Teeth - 1 x Flywheel Connector Outer Diameter 34mm (Optional Inner Diameter: 21, 26, 31) - 1 x Set of Plastic & Copper Plug-in Components - Other Accessories Note: - Some practical ability, basic circuit and assembly knowledge are needed for installation. Please tell us the inner diameter of the flywheel connector you want when purchasing.Usually it cost about 35USD-50USD.